Bambu TPU 95A HF is an amazing TPU filament made for high - speed 3D printing. It prints 3 times faster than regular TPU 95A, solving the long - print problem. Just like traditional TPU, it has great interlayer adhesion, impact resistance, flexibility, and cold - temperature resilience. No need to compromise on quality for speed!
**High - Speed Printing**: With Bambu TPU 95A HF, you can boost your TPU printing efficiency. Its print speed is 3 times that of standard TPU 95A.
| | Bambu TPU 95A | Bambu TPU 95A HF |
| --- | --- | --- |
| Nozzle Temperature / °C | 230 | 230 |
| Max Volumetric Speed / (mm³/s) | 3.6 | 12 |
| Printing Speed / (mm/s) | 44 | 147 |
| Model Specimens | Diameter: 50 mm Height: 100 mm Infill:40% | |
**Soft and Flexible**: This filament is super soft and flexible, with great impact resistance. It's perfect for printing parts that need to handle impacts, collisions, and falls.
**Accessory Compatibility**:
- **Build Plate**: Cool Plate, Engineering Plate, High Temperature Plate, or Textured PEI Plate are recommended.
- **Hotend**: Hardened Steel Nozzle (0.4 / 0.6 / 0.8 mm) and Stainless Steel Nozzle (0.4 mm) are good. Avoid the Stainless Steel Nozzle (0.2 mm).
- **Glue**: Use Bambu Liquid Glue or a Glue Stick.
**Recommended Printing Settings**:
- Drying Settings (Blast Drying Oven): 70 °C, 8 h
- Printing and Keeping Container's Humidity: < 20% RH (Sealed, with Desiccant)
- Nozzle Temperature: 220 - 240 °C
- Bed Temperature (with glue): 30 - 35 °C
- Printing Speed: < 200 mm/s
**Physical Properties**: Density is 1.22 g/cm³, melting temperature is 183 °C, and melt index is 36.5 ± 2.6 g/10 min.
**Mechanical Properties**: Tensile strength is 27.3 ± 0.8 MPa, and breaking elongation rate is > 650%.
**Printing Tips**: Dry the filament at 70°C for 8 hours before use and after storage. Check the TPU Printing Guide for better quality.
**Included**: 1x Filament & Desiccant, Instructions & Spool sticker, 1x Filament Label.
Using this Bambu TPU 95A HF filament is easy. First, make sure to dry it in a blast drying oven at 70 °C for 8 hours. It's very sensitive to humidity, so keep it in a container with desiccant and keep the humidity below 20%. When printing, set the nozzle temperature between 220 - 240 °C and the bed temperature (with glue) at 30 - 35 °C. Don't print faster than 200 mm/s.
For accessories, use the recommended build plates, hotends, and glue mentioned in the product description. After printing, if you want to store the filament on the spool, follow the instructions for the printed spool.
To keep the filament in good condition, always dry it before use and after storage. Also, refer to the Filament drying instructions on WIKI for more details. And before printing, check the TPU Printing Guide to get higher - quality prints.
