Are you in Australia and want to buy eSun PLA-ST Super Tough PLA Filament? The new eSun PLA-ST 3D print filament is a great choice. It has outstanding mechanical properties and prints as easily as other PLA filaments, making it perfect for mechanical part prototypes. Key Benefits: High impact resistance, elongation at break, and bonding strength. Low warping and good printing accuracy. Excellent oxidation resistance. Check out the comparison table below: PLA has 14% elongation at break and 5.6KJ/M2 notch impact; PLA+ has 20% elongation at break and 9KJ/M2 notch impact; while PLA-ST has 121.25% elongation at break and 60.36KJ/M2 notch impact. Printing Settings: Best printing temperature is 190 - 210℃, bed temperature is 40 - 60℃, printing speed is 40 - 100mm/s, and use a 100% cooling fan. Browse more eSun Filament, all PLA, and speciality filaments.
Using this eSun PLA-ST 3D printing filament is easy. First, set your printer's temperature between 190 - 210℃ and the bed temperature at 40 - 60℃. Keep the printing speed at 40 - 100mm/s and turn on the cooling fan to 100%. When printing, make sure the environment is clean and dry to avoid any impurities affecting the print. After use, store the filament in a cool, dry place to maintain its quality. Don't expose it to direct sunlight or high humidity for a long time. If you encounter any issues during printing, check the settings again and make sure the filament is fed smoothly.
