Are you in Australia and eager to purchase top - notch 3D printing filament? Look no further! PolyLite™ is a remarkable family of 3D printing filaments crafted from the finest raw materials. They offer outstanding quality and reliability. PolyLite™ ABS, in particular, is made from a specialty bulk - polymerized ABS resin. It has far less volatile content than traditional ABS resins. This means you'll enjoy excellent printing quality with hardly any odor during the printing process. Here are the print settings: Nozzle Temperature ranges from 245˚C to 265˚C, Printing Speed is between 30mm/s and 50mm/s, Bed Temperature should be set from 90˚C to 100˚C. For the bed surface, use BuildTak® or a PEI sheet with ABS slurry. As for the cooling fan, set it to LOW for better surface quality or turn it OFF for better strength. The PolyLite specifications include Young’s Modulus of 2174 ± 285 Mpa, Tensile Strength of 33.3 ± 0.8 Mpa, Bending Strength of 59.0 ± 1.3 Mpa, Impact Strength of 12.6 ± 1.1 kJ/m2, Glass Transition Temperature of 101˚C, and Vicat Softening Temperature of 104˚C. Also, you can browse more Polymaker products like ASA Filament, ABS Filament, Nylon Filament, and many others.
Using this Polymaker PolyLite ABS filament is easy. First, set your printer's nozzle temperature between 245˚C and 265˚C, and the bed temperature from 90˚C to 100˚C. Choose BuildTak® or a PEI sheet with ABS slurry as your bed surface. When it comes to the cooling fan, if you want a better surface finish on your print, set the fan to a low speed. If you're more concerned about the strength of the printed object, turn the fan off. Printing speed should be between 30mm/s and 50mm/s. As for maintenance, keep the filament in a dry place to prevent moisture absorption, which can affect the printing quality. Also, make sure to clean your printer's nozzle regularly to avoid clogs. When not in use, store the filament properly to maintain its quality for future prints.
